IR Curtain Sensors for Indoor/Outdoor Access Control, 25ft
Model Number: E-9622-4B25
These infrared photobeam curtain/barrier sensors are perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited.
Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap is removed.
No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included.
These infrared photobeam curtain/barrier sensors are perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited.
Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap is removed.
No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included.
- Rugged aluminum construction
- LED alignment indicator
- No synchronizing wires required
- NO/NC relay output
- Weather-resistant IP54 construction
- Slimline design (7/8" x 1-5/16" cross section)
- Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable)
- For windows, doorways, etc., where space is limited
- L-brackets and mounting hardware included
- Multi-Frequency: Reduces interference and eliminates crosstalk when multiple units are used in close proximity to one another
Type | IR Curtain Sensors for Indoor/Outdoor Access Control |
Current Draw | Standby - 89mA, Active - 73mA |
Number of Beams | 4 |
Sensing Range | Up to 25' (8m) outdoor, 50' (16m) indoor |
Operating Voltage | 12~24VDC |
Reaction time | 0.5~32.5 ms |
Detection System | Simultaneous break of 2 adjacent beams or any single beam (programmable) |
LEDs | (On): powered, aligned properly, (Flash): when beam is broken, (Off): no power |
Case material | Weather-resistant IP54 / Aluminum alloy |
Output | NO/NC relay output, 1A @ 12~24VDC |
Operating Temperature | -49º~131º F (-45º~55º C) |
Dimensions | 22-1/2" x 1-5/16" x 7/8" (572 x 33 x 22 mm) [Length x Width x Height] |
Follow us on: