Passive CCTV Balun with Ground Loop Isolator (Discontinued)
Model Number: EB-P101-24GQ
The new EB-P101-24GQ video balun with ground-loop isolator provides an inexpensive, flexible solution for dealing with ground loops on CCTV signal lines.
The EB-P101-24GQ is a Passive Video Balun with Ground Loop Isolator. A Passive Video Balun allows a CCTV camera's video signal to be transmitted over low-cost CAT5 unshielded twisted pair (UTP) cable instead of costly coax cable. Suitable for full-motion color and monochrome cameras, they provide a quick, low-cost way to connect CCTV cameras to a monitor, multiplexer, or video recorder at up to 980ft away.
Video ground loop isolators are passive devices that help to reduce ground loop interference caused by multiple building grounds and differences in ground potential. Ground loop isolators can be installed in new installations or added to existing installations. Video ground loop isolators should be installed on the camera side of your cable.
The new EB-P101-24GQ video balun with ground-loop isolator provides an inexpensive, flexible solution for dealing with ground loops on CCTV signal lines.
The EB-P101-24GQ is a Passive Video Balun with Ground Loop Isolator. A Passive Video Balun allows a CCTV camera's video signal to be transmitted over low-cost CAT5 unshielded twisted pair (UTP) cable instead of costly coax cable. Suitable for full-motion color and monochrome cameras, they provide a quick, low-cost way to connect CCTV cameras to a monitor, multiplexer, or video recorder at up to 980ft away.
Video ground loop isolators are passive devices that help to reduce ground loop interference caused by multiple building grounds and differences in ground potential. Ground loop isolators can be installed in new installations or added to existing installations. Video ground loop isolators should be installed on the camera side of your cable.
- Transmits up to 1,300ft (400m) color video or up to 1,950ft (600m)
B/W video - High immunity from interference
- Passive operation - No external
power required - Screwless terminals for
quick installation - 5" Pigtail for flexible installation
- Built-in surge protection
Max. Range | B/W- 1,950' (600m), Color- 1,300' (400m) |
Maximum input | 1.1Vp-p |
Insertion loss | <2dB per pair from DC~6MHz |
Return loss | >15dB from DC~6MHz |
Common Mode Rejection | >40 dB, 15KHz~6MHz |
Power | No power required |
Wire Type | UTP (Unshielded Twisted Pair) 16~24 AWG |
Wire Category | Cat2~Cat6 |
Impedance | Coax, Male BNC- 75Ω @ 1MHz, Screwless Terminal- 100Ω@1MHz |
Attenuation | DC~6MHz, 6.6 dB max |
Maximum Clamping Voltage | 8V |
Frequency response | DC~6MHz |
Surge Protection | Renewable solid state surge protection |
UTP Connection | Silver plated |
Video Format | NTSC, PAL, SECAM |
DC Loop resistance | 52Ω/1000' (52Ω/305m) |
Differential Capacitance | 19pF/ft max. (62pF/m max.) |
Insulation Resistance | 100MΩ |
Isolation Voltage | 800V (min.) |
Reaction Time | <1ns |
Operating Humidity | 0~95% (non-condensing) |
Operating Temperature | 32º~131º F (0º~55º C) |
Storage Temperature | -4º~158º F (-20º~70º C) |
Cable Length | 5" (127mm) |
Case | ABS plastic |
Weight | 2.1-oz (60g) |
Dimensions | 2-3/8" x 1-1/8" x 13/16" (61 x 30 x 21 mm) |
Follow us on: