Flush-Mount Outdoor Access Keypad (Discontinued)
Model Number: SK-1123-FQ
- Suitable for flush-mount applications. Fits conveniently
in back box - 2 Outputs:
- Main relay
(Form C 5A@30VDC). - Auxiliary (Transistor ground 100mA@24VDC).
- Main relay
- Relay can be programmed for momentary (1~999 seconds)
or latch - Programmable LED keys: Full-time ON, ON when keys are pressed, Full-time OFF; suitable for
solar applications - Code flexibility: Each code can be 4~8
digits long - Egress input for exiting the
protected premises - Dual voltage: 12~24 VDC/VAC operation
- Tamper switch: N.C. dry contact 3A@12VDC
- Mantrap: For a protected area with 2 doors, this feature allows only 1 door to be open
at any time - All features are programmed directly from the keypad, eliminating the need for an
external programmer - Duress output: Signals a silent alarm if an authorized user is forced to open the door
under duress - Door-forced-open and door-propped-open
alarm output - Door-hold-open mode available
- Keypad can be programmed to emit beeps for key presses or operate
in silent mode - Auto or manual code entry checking:
- Auto: No # key required after
each code. - Manual: # key must be pressed after
every code.
- Auto: No # key required after
Note: The SK-1123-FQ has been replaced by the SK-1123-FDQ
Type | Weather-Resistant Digital Access Keypad |
Operating Voltage | 12~24 VDC/VAC |
Current Draw - Standby | 10mA@12VDC |
Current Draw - Keypress | 45mA@12VDC |
Current Draw- Relays Active | 100mA@12VDC |
Number of Coded Outputs | 2 |
Relay Output- #1 | 5A@30VDC, Form C, NO/C/NC |
Relay Output- Transistor Ground | 100mA@24VDC |
Additional Output | Mantrap and duress: 100mA@24VDC |
Egress Inputs | N.O. ground, 3A@12VDC |
Door Sensor Input | N.C. ground |
Dimensions | 4-3/4"x3-1/8"x1-15/16" (120x80x46mm) |
Weight | 11-oz (300g) |
Follow us on: