DIP-Switch Coded Transmitter
Model Number: SK-919T1-GBDQ
The ENFORCER DIP-Switch Coded Transmitter uses a DIP switch to set the code. Suitable for applications requiring large numbers of transmitters with identical codes. A secured site might want all engineers on a project to have access to the same buildings, while another working group might need access to a different set. Similarly, a gated community might want to have one code for all residents, with the ability to change the code if transmitters are lost or stolen.
The ENFORCER DIP-Switch Coded Transmitter uses a DIP switch to set the code. Suitable for applications requiring large numbers of transmitters with identical codes. A secured site might want all engineers on a project to have access to the same buildings, while another working group might need access to a different set. Similarly, a gated community might want to have one code for all residents, with the ability to change the code if transmitters are lost or stolen.
- Use for "block coding" (Multiple transmitters programmed to the same code)
- Frequency 315MHz*
- Operates up to 500ft (150m)†
- LED Transmission and low battery indicator
- Includes 3VDC lithium battery (CR-2032)
- Compatible with all 315MHz SK-series receivers
- Coding by 8-pin DIP switch providing 256 combinations
- Easily pocketable pendant with golden key ring
*434MHz version also available – SK-939T1-GBDQ
† Actual range will vary greatly depending on the installation and operating environment
† Actual range will vary greatly depending on the installation and operating environment
Type | 1-Button RF DIP-Switch coded Transmitter |
RF Frequency | 315MHz |
No. of Buttons | 1 |
Channels | 1 |
Dimensions | 1-1/4"x2-3/16"x5/16" (31.5x55x8 mm) |
Follow us on: