Xenon Tube Strobe Light - Red, 6~12VDC, UL Listed
Model Number: SL-126Q/R
- For "informative" general signaling requirements
- Incorrect polarity cannot damage circuit or
draw current - Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue
to function - Low current consumption with long operating lifespan of over 300 continuous hours
(2,000,000 flashes) - Includes choice of amber, blue, clear, green
or red lens - Lens is made of high-impact resistant acrylic, case of high-impact resistant
ABS plastic - The SECO-LARM SL-126Q strobe lights come with a protective inner cover. This protects the high-voltage xenon tube when the colored lens has
been removed - Use in temperature ranging from
-22ºF (-30ºC) to 140ºF (60ºC) - For 6- to
12-Volt use LED version available - Replacement Lens Ordering Information
Circuits | All solid-state |
Input Connections | Red/Positive Black/Ground |
Leads | #18 Gauge, 12" Long |
Electrical Protection | Reverse polarity protected |
Illumination | 100,000 Candlepower |
Operating Life | Over 2,000,000 flashes (300 hours continuous) |
Input voltage | 6~12 VDC |
Operating Temperature | -22º~140º F (-30º~60º C) |
Base | High-impact black ABS |
input current | 120mA±20%@6VDC 200mA±20%@12VDC |
Flash Rate | Over 60 per minute at 6 VDC. Over 90 per minute at 12 VDC |
Lens | High-impact resistant acrylic |
Follow us on: