4-in-1 HD TVI, CVI, AHD, Analog Rollerball Cameras - 2.8mm, White (Discontinued)
Model Number: EV-Y2201-A2WQ
Discontinued product: Replace by EV-Y2251-A2WQ
Discontinued product: Replace by EV-Y2251-A2WQ
- 1080p Resolution
- 2.8mm ICR for a wide viewing angle
- 3D-NR (3D Digital Noise Reduction)
- DWDR (Digital Wide Dynamic Range)
- 12 IR SMT LEDs for low-light situations
- Joystick OSD control for easy camera programming
- Heavy-duty vandal-resistant design
- Weatherproof (IP65) construction
Housing Color | White |
Type | Fixed Rollerball Camera |
Image sensor | 1/2.9" 2MP Sony CMOS |
Formats | TVI / CVI / AHD / Analog (TVI Default) |
Resolution | 1920x1080 |
Viewing Angle | 90° |
TV Lines | 1200TVL |
3D-NR | Yes |
2D-NR | Yes |
DWDR | Yes |
Cable OSD Control | Yes |
On Screen Display (OSD) | Yes |
Megapixels | 2MP |
Minimum Illumination - IR On | 0Lux |
Minimum Illumination- LEDs off | Color: 0.1Lux/F1.4, B/W: 0.01Lux/F1.4 |
IR Range | Up to 50ft (15m) |
Video Output | 1.0Vp-p complex video output |
FPS | 30FPS |
Lens | 2.8mm ICR |
F Stop | F1.4 |
No. of IR LEDs | 12 SMT |
S/N Ratio | 50dB |
DSS (Digital Slow Shutter) | Yes |
Shutter Control | Yes |
Operating Voltage | 12VDC |
Current Draw | ON: 150mA, OFF: 80mA |
Gain Control | Yes |
White Balance | Auto, Day & Night |
IP Rating | IP65 |
Operating Temperature | -4°~131° F (-20°~55° C) |
Dimensions | 3-11/16"x2-15/16" (93x75 mm) |
Weight | 13.1-oz (370g) |
The screen is black
The image is foggy or washed out at night
The screen image is dim
The screen image has poor contrast
The screen image flickers
The screen image is distorted
The camera case is hot
IR LEDs do not turn on
- Check that the camera is powered up
- Check that the power supply’s polarity is correct
- Check that the monitor is powered up
- Check that the video cable connecting the camera to the monitor is connected properly
The image is foggy or washed out at night
- Check that there are no objects very close to the camera
- Check that there are no highly reflective objects in the scene
The screen image is dim
- Clean the lens using a soft, clean cloth
- Check that the light source is adequate
The screen image has poor contrast
- Adjust the monitor’s contrast knob
- Change the position of the camera
The screen image flickers
- Change the position of the camera, check cables and format setting
The screen image is distorted
- Change the position of the camera, check cables and format setting
The camera case is hot
- Check that the correct power supply is in use
IR LEDs do not turn on
- Check that the correct power supply is in use
Follow us on: