Wave-to-Open Sensor - Spanish
Model Number: SD-927PKC-NSQ
The ENFORCER No-Touch Request-To-Exit Sensor uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since it is No-Touch, this sensor is ideal for use in hospitals, clinics,labs, clean rooms (to reduce the risk of contamination), schools, factories, or offices.
The ENFORCER No-Touch Request-To-Exit Sensor uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since it is No-Touch, this sensor is ideal for use in hospitals, clinics,labs, clean rooms (to reduce the risk of contamination), schools, factories, or offices.
- Dual voltage, 12~24 VAC/VDC
- Range adjustable from 23/8"-8" (6~20 cm)
- Stainless steel single-gang plate
- 3A relay, adjustable from 0.5~30 sec, toggle, or as long as hand is near the sensor
- Quick connect screw-less terminal block
- LED illuminated sensor area for easy identification
- Selectable LED colors (turns from red to green or green to red) when activated
Type | Wave-to-open Sensor |
Current Draw | 120mA@12VDC |
Sensing Range | Adjustable, 2-3/8"~8" (6-20 cm) |
Operating Voltage | 12~24 VAC/VDC |
Reaction time | 10mS |
LEDs - Red | Triggered |
LEDs - Green | Standby |
Relay Type | Form C (NO/NC/COM) 3A@24VDC |
Output Time | Adjustable from 0.5~30 sec, toggle, or as long as hand is near the sensor |
Switching Capacity | 3A@24VDC |
Operating Temperature | -4°~131° F (-20°~55° C) |
Dimensions | 4-1/2" x 2-3/4" x 1-5/16" (115 x 70 x 33.5 mm) |
Weight | 3oz (85g) |
Follow us on: