Wave-to-Open Sensor - White plate
Model Number: SD-927PWCQ
The ENFORCER Wave-to-Open Sensor uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
The ENFORCER Wave-to-Open Sensor uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
- Range up to 2" (5cm)
- White plastic single-gang plate
- 3A relay, triggers minimum 0.5 sec or as
long as hand is near the sensor - Quick connect screw-less terminal block
- LED illuminated sensor area for easy identification.
- Selectable LED colors (turns from red to green or green to red) to show sensor activated.
Type | Wave-to-Open Sensor Wall Plates |
Current Draw | 50mA@12VDC |
Sensing Range | Up to 2" (5cm) |
Operating Voltage | 12VDC |
Reaction time | 10mS |
LEDs - Red | Standby |
LEDs - Green | Triggered |
Relay Type | Form C (NO/NC/COM) 3A@12VDC |
Output Time | 0.5S or as long as unit is triggered |
Switching Capacity | 3A@24VDC |
Operating Temperature | -4°~131° F (-20°~55° C) |
Dimensions | 4-1/2" x 2-3/4" x 1-5/16" (115 x 70 x 33.5 mm) |
Weight | 2.5oz (70g) |
Follow us on: