Twin Photobeam Detectors with Laser Beam Alignment [290ft (90m) outdoors, 590ft (180m) indoors*] (Discontinued)
Model Number: E-960-D290GQ
*Special order. Contact SECO-LARM for details.
ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.
*Special order. Contact SECO-LARM for details.
ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.
- Built-in laser beam alignment system speeds accurate,
reliable positioning. - Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves,
birds, etc. - Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow,
mist, etc. - Weatherproof, sunlight-filtering case for indoor &
outdoor use. - Non-polarized power inputs.
- Anti-frost system so that beam functions even in
extreme conditions. - Automatic input power filtering with special noise
rejection circuitry. - NC/NO trigger output.
- N.C. tamper circuit included.
- "U" Brackets included for pole mounting.
- Quick, easy installation with built-in laser beam
alignment system. - Monitored output: N.C., 10kΩ Resistor.
Max. Range (Outdoor) | 290' (90m) |
Max. Range (Indoor) | 590' (180m) |
Current | 150mA |
Power | 12-30VDC/AC 60Hz, 200mA (non-polarized) |
Detection Method | Simultaneous break of 2 beams |
Interrupt Speed | 10msec |
Alarm/Trigger Output | SPDT NO/NC/COM relay, 1A@30 VDC/VAC |
Tamper Output | N.C. switch, 1A@30 VDC/VAC |
LEDs - Red | ON indicates transmitter and receiver not aligned or bream is broken |
LEDs - Yellow | ON indicates weak receiver signal or beam is broken |
LEDs - Green | ON indicates unit connected to power |
Laser Wavelength | 650nm |
Laser Output Power | <5mW. |
Alignment Angle | Horizontal (+/-)90º, Vertical: (+/-)5º |
Operating Temperature | -13º~+131º F (-25º~+55º C) |
Weight | 2.5-lb (1.1kg) |
Case | PC Resin |
Follow us on: