Mini Single Photobeam Sensor, 50ft
Model Number: E-964-S50TB
- 4 selectable frequencies to reduce interference
- Up to 50ft (15m) sensing distance
- Small size for a less conspicuous installation
- Simple to install
- Built-in AGC control to filter out lighting disturbances
- Signal strength indicator for easier alignment
- LED indicators for power, signal strength, and trigger
- Weatherproof for outdoor as well as indoor use (IP65)
- Mounting hardware included
| Type | IR Multi-Frequency Single Beam Sensor |
| Current Draw | Transmitter- 15mA@12VDC, Receiver- 30mA@12VDC |
| Number of Beam Frequencies | 4 |
| Number of Beams | 1 |
| Sensing Range | Up to 50ft (15m) |
| Infrared LED Wavelength | 940nm |
| Operating Voltage | 10~24VDC |
| Interupt Speed | 50ms |
| LED Beam Spread Angle | Approximately ±10° |
| LEDs - Red | Indicates transmitter and receiver are not aligned or beam is broken (Alarm) |
| LEDs - Yellow | Dims/off when receiver's signal is weak / off when beam is broken |
| LEDs - Green | Indicates connected to power |
| Output | NO/NC relay (set by jumper, default is N.C.) 0.5A@30VAC/VDC |
| Operating Humidity | 0~95% |
| Operating Temperature | -13°~131°F (-25°~55°C) |
| Dimensions | 3-11/16" x 2-3/8" x 1-13/16" (94 x 60 x 46 mm) |
| Weight | 2.6-oz (74g) |
| Enclosure | IP65 Weatherproof |
Follow us on:
