Outdoor Wave-to-Open Sensor – Single-Gang – English

Model Number: SD-9263-KSQ

The ENFORCER Outdoor Wave-to-Open Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

Adjustable sensor range up to 7" (18cm)
Weatherproof (IP65) for outdoor use*
Stainless steel plate
1.2A relay, adjustable trigger duration 0.5~30 seconds or toggle
LED illuminated sensor area for easy identification
Selectable LED colors (turns from red to green or green to red) to show sensor activated

*When properly installed

Frequently Asked Question (FAQ)

Click here for a full line of Touchless Solutions

Specifications Related Products Troubleshooting

Type	Outdoor Wave-to-Open Sensor
Current Draw	Standby- 16mA@12VDC / 25mA@24VDC, Triggered- 25mA@12VDC / 32mA@24VDC
Sensing Range	2"~7" (5~18cm)
Operating Voltage	12~24 VDC
Reaction time	10mS
LEDs - Red	Standby (Colors are reversible.)
LEDs - Green	Triggered (Colors are reversible.)
Relay Type	Form C dry contact 1.2A@24VDC
Output Time	0.5~30 s, toggle
Operating Temperature	-4°~131° F (-20°~55° C)
Dimensions	4-1/2" x 2-3/4" x 1-1/2" (115 x 70 x 39 mm)
Weight	108g
Enclosure	Weatherproof IP65

Sensor is triggering unintentionally.

ENFORCER Outdoor Wave-to-Open Sensors can be used either indoors or outdoors. However, due to infrared technology limitations, it is recommended that a hood or shield be used when installing outdoors to shield the sensor from direct light (sunlight, reflections from shiny objects, etc.). Direct light may cause the sensor to trigger unintentionally.

Tags: form c, spdt, single gang, request-to-exit, no touch, plates, override, button, delay, timer, security, access control, weatherproof IP65