Surface-Mount Wave-to-Open Sensor with Manual Override Button

Model Number: SD-9773-KNEVQ

The ENFORCER Surface-Mount Wave-to-Open Sensor with Manual Override Button is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices. A manual override allows for operation if the sensor is disabled.

Adjustable sensor range up to 6" (15cm)
1A relay, adjustable trigger duration 0.5~30 seconds or toggle
LED illuminated sensor area for easy identification
Selectable LED colors (turns from red to green or green to red) when sensor is activated
Aluminum alloy and ABS plastic housing
IP54 Weather-resistant for outdoor use

Frequently Asked Question (FAQ)

Click here for a full line of Touchless Solutions

Specifications Related Products

Operating Voltage	12~24 VDC
Current Draw	Standby (red): 20mA@12VDC / 26mA@24VDC Triggered (green): 26mA@12VDC / 32mA@24VDC Standby (green):16mA@12VDC / 20mA@24VDC Triggered (red): 31mA@12VDC / 39mA@24VDC
Relay Type	SPDT dry contact, 1A@24VDC
IP Rating	IP54
Response Time	10ms
LEDs - Standby	Red (reversible to green)
LEDs - Triggered	Green (reversible to red)
Output Time	0.5~30 s, toggle
Range	1-9/16"~6" (4~15 cm)
Operating Temperature	-4°~131° F (-20°~55° C)
Weight	9.5-oz (270g)
Dimensions	3-1/8"x 4-1/2"x1-1/8" (80x115x28mm)

Tags: Wave-to-open, surface-mount, Manual Override Button, IP54, 1A Relay, sensor, weather-resistant IP54