Strobe Light, 6~24VDC, Blue
Model Number: SL-126-A24Q/B
- For "informative" general signaling requirements
- Incorrect polarity cannot damage circuit or
draw current - Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue
to function - Low current consumption with long operating lifespan of over 300 continuous hours
(2,000,000 flashes) - Includes choice of amber, blue, clear, green
or red lens - Lens is made of high-impact resistant acrylic, case of high-impact resistant
ABS plastic - The SECO-LARM strobe light comes with a protective inner cover. This protects the high-voltage xenon tube when the colored lens has
been removed - Use in temperature ranging from
-22ºF (-30ºC) to 140ºF (60ºC) - SL-126-A24Q -- For 6- to
24-Volt use - LED version available
- Replacement Lens Ordering Information
Model No. | Color | Voltage |
SL-126-A24Q/A | Amber | 6~24VDC |
SL-126-A24Q/B | Blue | 6~24VDC |
SL-126-A24Q/C | Clear | 6~24VDC |
SL-126-A24Q/G | Green | 6~24VDC |
SL-126-A24Q/R | Red | 6~24VDC |
Circuits | All solid-state |
Input Connections | Red/Positive, Black/Ground |
Leads | #18 Gauge, 12" Long |
Electrical Protection | Reverse polarity protected |
Illumination | 100,000 Candlepower |
Operating Life | Over 2,000,000 flashes (300 hours continuous) |
Input voltage | 6~24VDC |
Operating Temperature | -22º~140º F (-30º~60º C) |
Base | High-impact black ABS |
input current | 30mA±20%@6VDC 120mA±20%@12VDC 150mA±20%@24VDC |
Flash Rate | Over 30 per minute at 6 VDC. Over 70 per minute at 12 VDC. Over 100 per minute at 24 VDC |
Lens | High-impact resistant acrylic |
Follow us on: