Strobe Light, 6~24VDC, Clear
Model Number: SL-126-A24Q/C
- For "informative" general signaling requirements
- Incorrect polarity cannot damage circuit or
draw current - Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue
to function - Low current consumption with long operating lifespan of over 300 continuous hours
(2,000,000 flashes) - Includes choice of amber, blue, clear, Green,
or red lens - Lens is made of high-impact resistant acrylic, case of high-impact resistant
ABS plastic - The SECO-LARM strobe light comes with a protective inner cover. This protects the high-voltage xenon tube when the colored lens has
been removed - Use in temperature ranging from
-22ºF (-30ºC) to 140ºF (60ºC) - SL-126-A24Q -- For 6- to
24-Volt use - LED version available
- Replacement Lens Ordering Information
| Model No. | Color | Voltage |
| SL-126-A24Q/A | Amber | 6~24VDC |
| SL-126-A24Q/B | Blue | 6~24VDC |
| SL-126-A24Q/C | Clear | 6~24VDC |
| SL-126-A24Q/G | Green | 6~24VDC |
| SL-126-A24Q/R | Red | 6~24VDC |
| Circuits | All solid-state |
| Input Connections | Red/Positive Black/Ground |
| Leads | #18 Gauge, 12" long |
| Electrical Protection | Reverse polarity protected |
| Illumination | 100,000 Candlepower |
| Operating Life | Over 2,000,000 flashes (300 hours continuous) |
| Input voltage | 6~24 VDC |
| Operating Temperature | -22º~140º F (-30º~60º C) |
| Base | High-impact black ABS |
| input current | 30mA±20%@6VDC 120mA±20%@12VDC 150mA±20%@24VDC |
| Flash Rate | Over 30/minute at 6VDC. Over 70/minute at 12VDC. Over 100/minute at 24VDC. |
| Lens | High-impact resistant acrylic |
Follow us on:
