Outdoor Wave-to-Open Sensor – Slimline – Spanish
Model Number: SD-9163-KS1Q
The ENFORCER Outdoor Wave-to-Open Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
Frequently Asked Question (FAQ)
Click here for a full line of Touchless Solutions
The ENFORCER Outdoor Wave-to-Open Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
- Adjustable sensor range up to 7" (18cm)
- Weatherproof (IP65) for outdoor use*
- Stainless steel plate
- 1.2A relay, adjustable trigger duration 0.8~30 seconds or toggle
- LED illuminated sensor area for easy identification
- Selectable LED colors (turns from red to green or green to red) to show sensor activated
Frequently Asked Question (FAQ)
Click here for a full line of Touchless Solutions
Type | "Wave-To-Open" Request-to-Exit Plates with Adjustable Delay Timer, for Outdoor Use |
Current Draw | Standby- 16mA@12VDC / 25mA@24VDC, Triggered- 25mA@12VDC / 32mA@24VDC |
Sensing Range | 2"~7" (5~18cm) |
Operating Voltage | 12~24 VDC |
Reaction time | 10mS |
LEDs - Red | Standby (Colors are reversible.) |
LEDs - Green | Triggered (Colors are reversible.) |
Relay Type | Form C dry contact |
Output Time | 0.5~30 s, toggle |
Switching Capacity | 1.2A@24VDC |
Operating Temperature | -4°~131° F (-20°~55° C) |
Dimensions | 4-1/2" x 1-1/2" x 1-1/2" (115 x 39 x 39 mm) |
Weight | 2.2-oz (61g) |
Enclosure | Weatherproof IP65 |
Sensor is triggering unintentionally. |
|
Follow us on: